Photos: First Phase Of Remote Machinery Operation Testing Project Completes

Classification society DNV GL, automation systems vendor Høglund, ferry operator Fjord1, and the Norwegian Maritime Authority (NMA) have completed the first testing phase of the ROMAS (Remote Operation of Machinery and Automation Systems) project. The results were presented for the first time at the Nor-Shipping trade fair in Oslo this week.

Image Credit:

As ship systems become more complex, operators increasingly rely on the suppliers of individual systems to operate and maintain them. At the same time, finding machinery engineers who have the skills to deal with these sophisticated systems and are willing to work on board for weeks or even months is challenging.

One way of dealing with this is through remote operations. The key concept is to move the engine control room (ECR) from the ship to a shore-based engine control centre (ECC), where chief engineers can operate the propulsion and auxiliary machinery systems of a single ship, or a fleet of vessels.

DNV GL ROMAS Remote operation ferry
Image Credits:

The ROMAS research project, established by DNV GL, together with Høglund, Fjord1, and the NMA, is working to develop technical solutions and establish a framework of regulations, rules and verification methods to enable the remote, shore-based operation of ship machinery and systems.

Battery Fjord Ferry DNV GL
Image Credits:

“The overall goal of ROMAS is to provide improved operations and cost-efficiency while ensuring a safety level that is the same or better than today’s conventional operation,” says Steinar Låg, principal researcher on autonomous ships in DNV GL and ROMAS project manager. “But transferring responsibilities, monitoring, and control facilities to shore also reduces the need for machinery engineers on board, which could make marine engineering jobs more attractive.”

ROMAS project completes first phase of remote machinery operation testing
Image Credit:

The test campaign was conducted in the first quarter of 2019, using the Fjord1 ferry Fannefjord, with the ECC established at Fjord1’s office in Molde. The Fannefjord is a DNV GL classed LNG/battery/diesel powered ro-ro ferry that operates on the 35-minute crossing in Moldefjorden between Molde and Vestnes.

Image Credits:

Kim Gunnar Jensen, project engineer in Fjord1, notes that digital and connected solutions on board enable more remote operations with increased shore support for improved safety and efficiency. “The ROMAS pilot project provides us with an arena to explore these possibilities and find solutions for a new generation of ferry transport that will benefit all stakeholders.”

DNV GL ROMAS Remote operation ferry_
Image Credits:

ROMAS will continue to the end of 2019, supported by funding from the Norwegian Research Council. The long-term plan is to use the experience from the project to guide future operations and the development of new products and services, including a “remote ready” integrated automation system (IAS) from Høglund, the applicable rules and Approval in Principle programs from DNV GL, and regulations from the Norwegian Maritime Authority, to enable Fjord1 and other ship owners to consider commercial deployment for new generations of ships. “Through the ROMAS project we are building knowledge that will be used to develop new rules and new verification methods, ensuring that the remote operations concept can be implemented with a safety level that is the same or better than today’s conventional operations,” said Steinar Låg.


Leave a Reply

Your email address will not be published. Required fields are marked *

Latest Article

Discount up to 30% for this month

Lorem ipsum dolor sit amet consectetur adipiscing elit dolor